Yantai WonRay Rubber Tire Co., Ltd. has accumulated rich experience in the use of solid tires in various industries after more than 20 years of solid tire production and sales. Now let’s discuss the precautions for the use of solid tires.
1. Solid tires are industrial tires for off-Road vehicles, mainly consist with forklift solid tires, scissor lift tires, wheel loader tires, port tires and boarding bridge tires. Solid tires cannot be used for road transportation. Overload, overspeed, long-distance, and long-term continuous operation are strictly prohibited.
2. The tires should be assembled on qualified rims of the specified model and size. For example, Linde tires are nose tires, which are quick-loading forklift tires and can only be installed on special rims without lock rings.
3. The tire with the rim installed should ensure that the tire and the rim are concentric. When installing on the vehicle, the tire must be perpendicular to the axis.
4. The solid tires on any axis should be manufactured by the same solid tire factory, of the same specifications and with matching wear. It is not allowed to mix solid tires and pneumatic tires or solid tires with different degrees of wear to avoid uneven force. Cause tire, vehicle, personal accident.
5. When replacing solid tires, all tires on any one axle should be replaced together.
6. Ordinary solid tires should try to avoid contact with oil and corrosive chemicals, and the inclusions between the patterns should be removed in time.
7. The maximum speed of forklift solid tires shall not be higher than 25Km/hr, and the solid tires of other industrial vehicles shall be lower than 16Km/hr.
8. Due to the poor heat dissipation of solid tires, in order to prevent the tires from being damaged due to excessive heat generation, continuous use should be avoided, and the maximum distance of each stroke during driving should not exceed 2Km. In summer, the temperature of continuous driving is too high, it should be used intermittently, or necessary cooling measures should be taken.
Post time: 08-10-2022